Skip to content

PIONEER

  • Sold out

    3/4" Shell Mill Screw | Small Head

    PIONEER
    $11.00 - $11.00
    $11.00
    $11.00 - $11.00
    $11.00
    Out of stock

      Shell Mill Pilot 3/4 Part Number SCW-SM075-SM Thread 3/8-24 D 0.56 H HEX 0.31 L1 1.38 L2 1.00 L3 0.38 Max tightening T...

    View full details
    $11.00 - $11.00
    $11.00
    $11.00 - $11.00
    $11.00
    Sold out
  • Save 15% Save %

    BT30 3/4" Shell Mill Adapter

    PIONEER
    $139.30
    $139.30 - $139.30
    $139.30
    $118.40
    $118.40 - $118.40
    $118.40
    Low stock

    BT30 1/2 SHELLMILL ADAPTER 1.19 Dynamically Balanced G6.3 @ 20,000 RPM ISO AT3 Taper Tolerance Tapers are ground better than AT3 fo...

    View full details
    $139.30
    $139.30 - $139.30
    $139.30
    $118.40
    $118.40 - $118.40
    $118.40
    Save 15% Save %

  • BT30 End Mill Holder 1/2"

    PIONEER
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00
    In stock

    BT30 3/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00

  • BT30 End Mill Holder 1/4"

    PIONEER
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00
    In stock

    BT30 1/4" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00

  • BT30 End Mill Holder 3/16"

    PIONEER
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00
    In stock

    BT30 3/16" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or be...

    View full details
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00

  • BT30 End Mill Holder 3/8"

    PIONEER
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00
    In stock

    BT30 3/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00 - $76.00
    $65.00
  • Save up to 20% Save %

    BT30 ER16H

    PIONEER
    $145.70 - $147.90
    $145.70 - $147.90
    $145.70
    $116.00 - $118.00
    $116.00 - $118.00
    $116.00
    In stock

    Premium Precision 0.0001”  Runout taper to bore within 3 Microns (0.0001”) T.I.R. Premium Precision Collets Standard Collet @ 0.0004” @ ...

    View full details
    $145.70 - $147.90
    $145.70 - $147.90
    $145.70
    $116.00 - $118.00
    $116.00 - $118.00
    $116.00
    Save up to 20% Save %
  • Save up to 19% Save %

    BT30 ER20H

    PIONEER
    $88.66 - $100.00
    $88.66 - $100.00
    $88.66
    $71.81 - $81.00
    $71.81 - $81.00
    $71.81
    In stock

    Premium Precision 0.0001”  Runout taper to bore within 3 Microns (0.0001”) T.I.R. Premium Precision Collets Standard Collet @ 0.0004” @ ...

    View full details
    $88.66 - $100.00
    $88.66 - $100.00
    $88.66
    $71.81 - $81.00
    $71.81 - $81.00
    $71.81
    Save up to 19% Save %
  • Sold out

    BT30 Pull Stud

    PIONEER
    $16.00 - $16.00
    $16.00
    $16.00 - $16.00
    $16.00
    Out of stock

    Machine Builder Brother: HPS-17   Note: It is critical that the correct retention knob is used with each machining center.  Please verify all dim...

    View full details
    $16.00 - $16.00
    $16.00
    $16.00 - $16.00
    $16.00
    Sold out
  • Save 15% Save %

    BT40 3/4" Shell Mill Adapter

    PIONEER
    $164.20
    $164.20 - $164.20
    $164.20
    $139.57
    $139.57 - $139.57
    $139.57
    In stock

    BT40 3/4 SHELLMILL ADAPTER 1.75 Dynamically Balanced G6.3 @ 20,000 RPM ISO AT3 Taper Tolerance Tapers are ground better than AT3 for ...

    View full details
    $164.20
    $164.20 - $164.20
    $164.20
    $139.57
    $139.57 - $139.57
    $139.57
    Save 15% Save %

  • BT40 End Mill Holder 1/2"

    PIONEER
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00
    Low stock

    BT40 1/2" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00

  • BT40 End Mill Holder 1/4"

    PIONEER
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00
    In stock

    BT40 1/4" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00

  • BT40 End Mill Holder 1/8"

    PIONEER
    $73.84 - $89.37
    $73.84 - $89.37
    $73.84 - $89.37
    $73.84
    In stock

    BT40 1/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $73.84 - $89.37
    $73.84 - $89.37
    $73.84 - $89.37
    $73.84

  • BT40 End Mill Holder 3/16"

    PIONEER
    $70.78 - $89.37
    $70.78 - $89.37
    $70.78 - $89.37
    $70.78
    In stock

    BT40 3/16" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or be...

    View full details
    $70.78 - $89.37
    $70.78 - $89.37
    $70.78 - $89.37
    $70.78

  • BT40 End Mill Holder 3/4"

    PIONEER
    $70.00 - $104.00
    $70.00 - $104.00
    $70.00 - $104.00
    $70.00
    In stock

    BT40 3/4" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $70.00 - $104.00
    $70.00 - $104.00
    $70.00 - $104.00
    $70.00

  • BT40 End Mill Holder 3/8"

    PIONEER
    $70.00 - $85.80
    $70.00 - $85.80
    $70.00 - $85.80
    $70.00
    In stock

    BT40 3/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $70.00 - $85.80
    $70.00 - $85.80
    $70.00 - $85.80
    $70.00

  • BT40 End Mill Holder 5/16"

    PIONEER
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00
    In stock

    BT40 5/16" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or be...

    View full details
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00 - $82.94
    $70.00

  • BT40 End Mill Holder 5/8"

    PIONEER
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00
    In stock

    BT40 5/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or bet...

    View full details
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00 - $87.50
    $70.00
  • Sold out

    CAT40 1/2" Shell Mill Adapter

    PIONEER
    $163.80 - $206.40
    $163.80 - $206.40
    $163.80 - $206.40
    $163.80
    Out of stock

    Features Coolant Thru Coolant Thru the Center DIN AD+B Flange Coolant Included FX Coolant Ports Versions Available Dynamically Balan...

    View full details
    $163.80 - $206.40
    $163.80 - $206.40
    $163.80 - $206.40
    $163.80
    Sold out

  • CAT40 3/4" Shell Mill Adapter

    PIONEER
    $98.00 - $129.00
    $98.00 - $129.00
    $98.00 - $129.00
    $98.00
    Low stock

    Features Coolant Thru Coolant Thru the Center DIN AD+B Flange Coolant Included FX Coolant Ports Versions Available Dynamically Balan...

    View full details
    $98.00 - $129.00
    $98.00 - $129.00
    $98.00 - $129.00
    $98.00

  • CAT40 End Mill Holder 1/2"

    PIONEER
    $64.00 - $95.00
    $64.00 - $95.00
    $64.00 - $95.00
    $64.00
    In stock

    CAT40 1/2" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or be...

    View full details
    $64.00 - $95.00
    $64.00 - $95.00
    $64.00 - $95.00
    $64.00

  • CAT40 End Mill Holder 1/4"

    PIONEER
    $60.00 - $95.00
    $60.00 - $95.00
    $60.00 - $95.00
    $60.00
    In stock

    CAT40 3/16" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or b...

    View full details
    $60.00 - $95.00
    $60.00 - $95.00
    $60.00 - $95.00
    $60.00

  • CAT40 End Mill Holder 1/8"

    PIONEER
    $64.00 - $90.00
    $64.00 - $90.00
    $64.00 - $90.00
    $64.00
    In stock

    CAT40 1/8" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or be...

    View full details
    $64.00 - $90.00
    $64.00 - $90.00
    $64.00 - $90.00
    $64.00

  • CAT40 End Mill Holder 3/16"

    PIONEER
    $60.00 - $94.00
    $60.00 - $94.00
    $60.00 - $94.00
    $60.00
    Low stock

    CAT40 3/16" ENDMILL ADAPTER   Premium Precision 0.0001” Runout taper to bore within 3 Microns (0.0001”) T.I.R. Bore ground to H5 tolerance or b...

    View full details
    $60.00 - $94.00
    $60.00 - $94.00
    $60.00 - $94.00
    $60.00